Waterproof High Quality Made in China 400W LED Driver

WATERPROOF LED POWER SUPPLY

OUTPUT

Output voltage

12VDC

24VDC

Output voltage range

12VDC± 0.5VDC

24VDC± 0.5VDC

Output сurrent

Max 33.4A

Max 16.7A

Output power

Max 400W

Output power range

0~400W

Ripple & Noise

≤ 120mV

≤ 240mV

Linear Regulation

± 1%

Load Regulation

± 1%

Start-up Time (Typ)

450ms/230VAC 500ms/115VAC

Hold Up Time(Typ)

200ms/230VAC 200ms/115VAC

INPUT

Input voltage

175-264Vac or 100-130Vac

Frequency

50/60Hz

Input сurrent

3.3A/230Vac or 5.8A/115Vac

Power factor

PF> 0.6

No-load power consumption

＜3W

Efficiency (typ.)

90%

90%

Inrush current(typ.)

Cold start 70A at 230Vac

Control surge capability

L,N:2KV L,N-PE:4KV

Leakage сurrent

Max. 0.5mA

Environment

Working temperature

ta: -30° C~ 50° C tc: 80° C

Working humidity

20 ~ 99%RH, condensing(Waterproof)

Storage temp., humidity

-40° C ~ 80° C, 10~95%RH

Protection

Overtemperature

Protection type: Turn off the output voltage, after the temperature drops, re-energize to restore.

Over load protection

Shut down the output when current load ≥ 110%~150%, auto recovers.

Short circuit protection

Protection type: It can be automatically restored after the fault is eliminated.

Isolation resistance

I/P-O/P: 100MΩ /500VDC/25° C/70%RH

Safety standards

IEC/EN61347; IEC/EN60950; IP67

EMC Test Standards

EN55015: 2013; EN61547: 2009; EN61000-3-2:2014; EN61000-3-3:2013

Reliability and Quality Control

Impact aging

100% of the product is fully loaded and impacted for 4 hours under an environment of at least 40° C± 5° C

Component derating

Under the steady-state conditions of rated input and output, the stress of components will not exceed its maximum nominal value

NOTE

All parameters not specifically mentioned are measured at 230VAC input, rated load and 25° C ambient temperature.

Ripple and noise test method: connect 0.1uF and 47uF capacitors in parallel at the terminal, and measure under 20MHZ bandwidth.

Ensure that the power supply is used under the rated parameters and environment.