Intelligent Control for RGB Lights Programmable
Operating temperature: -20℃ -- 85℃
Power supply: DC 5V-24V input (built-in battery) Capacity: 128MB -- 32GB
Battery capacity: 4000mAh format: FAT or FAT32 format
Power consumption: 4W File storage: *. Led
Data transfer port: 4PIN terminal
- Product Introduction
Xb-C100 touch-screen smart control code- writer
Product features
- Xb-c100 code writer: has display screen, easy to operate
- Xb-c100 supports operating system upgrade.
- Xb-c100 code writer has built-in battery, which can work continuously for 10 hours.
- Xb-c100 coder supports mainstream DMX512 chip, and can write code and write parameters to dmx512ic.
- Xb-c100 code writer can test dmx512ic lamp channel address and test effect.
- Xb-c100 coder port outputs enhanced TTL and 485 differential signal, which can carry TTL / DMX512 lamps.
- The xb-c100 coder can carry 512 / 2048 pixels at most (the maximum 512 pixels of the X-ray lamps take three channels as an example).
- Xb-c100 coder 22 built-in test effect (optional 3-channel / 4-channel built-in effect).
- Xb-c100 coder can be inserted into SD card to play the effect (software effect output is selected as k-1000), which is the same as that of k-1000c controller.
Code Writer Interface Definition
|
Definition of coder interface and indicator light |
|||
|
Number |
name |
port screen printing |
definition |
|
1 |
Charging port |
VCC/GND/VCC |
DC DC 12-24 V power supply socket |
|
2 |
Power indicator |
POWER |
Power indicator (normally on after startup) |
|
3 |
Status indicator |
Status |
Status indicator |
|
4 |
SD card slot |
SD |
SD card slot (player) |
|
5 |
Signal output port |
GND/A/B/ADDR |
Single line DMX512 connection port |
|
6 |
USB charging port |
DC5V |
USB 5V DC power supply port |
|
7 |
switch |
SWITCH |
Coder switch |
|
8 |
touch panel |
---- |
Coder operation panel (touch screen) |
Output Port Connection Mode
Wiring diagram of DMX512 Differential signal line
Customer Wiring diagram of DMX512 single line signal line Wiring diagram (Address of AB line)
Parameters
Operating temperature: -20℃ -- 85℃
Power supply: DC 5V-24V input (built-in battery) Capacity: 128MB -- 32GB
Battery capacity: 4000mAh format: FAT or FAT32 format
Power consumption: 4W File storage: *. Led
Data transfer port: 4PIN terminal
Weight: 1.7 Kg
Inch: L140mm * W100mm * H40mm
Hot Tags: Intelligent Control for RGB Lights Programmable, China Intelligent Control for RGB Lights Programmable suppliers, led controller, K 1000c Led Controller, RGB Edge Lights For Christmas, led controller for garage lighting, PU LED Neon Bar DC24V, led controller for club stage lighting
