K-1000C LED Controller
Operating temperature: -30℃～85℃
Type: SD card
Operating power: DC 5V ‐24V input
Capacity: 128MB-32GB
Power consumption: 2W
Format: FAT or FAT32
- Product Introduction
K-1000C Controller Specifications
Specific parameters
| Operating temperature: -30℃～85℃ | Type: SD card |
| Operating power: DC 5V ‐24V input | Capacity: 128MB-32GB |
| Power consumption: 2W | Format: FAT or FAT32 |
| Data transmission port: 3pin wiring terminal | Storage file: *.led |
|
|
|
| Weight: 0.35Kg | Dimensions: L159mm*W89mm*H24mmm |
K-1000C System – Key Features
Core Specifications
- Grayscale Support
32 to 65,536 levels of grayscale adjustment with software-based gamma correction.
- Light Source Compatibility
Supports point, line, and area light sources, including standard and custom-shaped configurations.
- Output Capacity
Single output port supports:
- Up to 512 pixels (DMX IC protocol).
- Up to 1,536 pixels (TTL/SPI protocol).
Note: DMX lamps occupy 3 channels per pixel (e.g., RGB).
- SD Card Playback
Stores up to 32 effect files on an SD card (128MB–32GB capacity).
- Flexible Operation Modes
Works standalone or in cascaded setups.
- Cascading Features:
Photoelectric isolation for anti-interference and stability.
Up to 100m cascade distance using 0.5mm² pure copper power cables.
- IC Locking & Address Management
ICs can be software-locked or manually selected via the controller's "IC" button.
Built-in DMX512 address writing:
One-key address assignment via LedEdit-K software (or higher versions).
- Pixel Compatibility
Supports 3/4/multi-channel pixels (RGBWYA) or single-channel pixels.
Built-in effects for RGB (3-channel) and RGBW (4-channel) configurations.
Testing & Diagnostics
- 22 preloaded test effects for quick diagnostics.
DMX512 lamp address testing function.
- Signal Output
Enhanced TTL and 485 differential (DMX) signal outputs.
Performance Notes
Frame Rate:
512 pixels: Up to 30 FPS.
1,024 pixels: Up to 25 FPS.
1,536 pixels: Up to 15 FPS.
Based on 1903 protocol IC; performance varies by IC type.
DMX512 Compliance:
Supports up to 512 pixels (1990 protocol).
Frame rates:
170 pixels: ~30 FPS.
512 pixels: ~20 FPS.
Applications
- Stage lighting, architectural accents, and large-scale LED displays.
- Custom installations requiring high flexibility and precise control
Marking meaning
1. Key Functions
| Key | Normal Operation | Key Combination |
|---|---|---|
| CHIP | Switch IC protocol modes | Enter Address Writing Mode: Press "CHIP" → "MODE" → Write addresses → "CHIP" → "MODE" to exit. |
| MODE | Switch effect files | DMX Auto-Addressing: Hold "MODE" for 5s in playback mode to activate. |
| SPEED+ | Increase effect speed | Built-in Effect Setup: Press "SPEED+" on startup to enter channel settings. Cycle Mode: Hold "SPEED+" + "SPEED-" → Display "C C C" indicates activation. |
| SPEED- | Decrease effect speed | DMX Channel Test: Press "SPEED-" on startup to enter test mode. |
2. Port Definitions
| Port | Function |
|---|---|
| DC 5-24V | Positive terminal for DC power input (5-24V). |
| GND | Negative terminal for DC power input (shared ground). |
| IN A / IN B | Cascade signal input: Connect to OUT A / OUT B of the upstream controller. |
| OUT A / OUT B | Cascade signal output: Connect to IN A / IN B of the downstream controller. |
| POWER | Power status indicator (lit when powered). |
| ERROR | System status indicator (flashes for errors). |
| SD CARD | Slot for SD card storage. |
| CLK | Clock signal line (DMX address writing). |
| A (DAT+) | Differential data signal positive line. |
| B (DAT-) | Differential data signal negative line. |
Key Improvements
Unified Terminology:
Replaced ambiguous terms (e.g., "interface" → "mode", "file cycle" → "cycle mode").
Standardized signal labels (e.g., "DAT+" → "A (DAT+)" for clarity).
Simplified Structure:
Merged repetitive entries (e.g., "GND" appears once with shared functions).
Grouped related actions under key combinations (e.g., "SPEED+" + "SPEED-").
Technical Precision:
Clarified cascade signal flow (upstream/downstream).
Added error status descriptions.
Visual Hierarchy:
Used bold for key names and critical modes.
Added line breaks for multi-step actions.
3. Description of display content (6-digit display):
|
Display |
Definition |
||
|
1 |
|
F_F_F |
Card reading error |
|
2 |
|
A_A_A |
DMX512 writing address |
|
3 |
|
C_C_C |
Effect cycle |
|
4 |
|
2_2_2 |
Cascaded control |
|
5 |
|
0_0_0 |
Enter DMX lamp address test/parameter writing |
|
6 |
|
CH 3 |
Built-in effect three-channel settings (RGB) |
|
7 |
|
CH 4 |
Built-in effect four-channel settings (RGBW) |
|
8 |
|
Address writing interface Chip display: DMX512IC code 61-83 Mode display: Undefined Speed bit: Channel number 0-99 |
|
|
9 |
|
Play interface Chip display: Loading IC code 0-30 Mode display: Program sequence Speed bit: Level 1-16 |
|
4. Frame frequency of speed level:
|
Speed |
Frame frequency/sec |
Speed |
Frame frequency/sec |
Speed |
Frame frequency/sec |
Speed |
Frame frequency/sec |
|
1 |
4 frames |
5 |
8 frames |
9 |
14 frames |
13 |
23 frames |
|
2 |
5 frames |
6 |
9 frames |
10 |
16 frames |
14 |
25 frames |
|
3 |
6 frames |
7 |
10 frames |
11 |
18 frames |
15 |
27 frames |
|
4 |
7 frames |
8 |
12 frames |
12 |
20 frames |
16 |
30 frames |
Interval Channel Configuration
The interval channel is configured based on the actual channel count of the lamp.
Note: The channel count corresponds to the number of DMX512 channels occupied by each IC-controlled lamp pixel (e.g., 3 channels for RGB).
Chip Model Selection
Click the dropdown menu to select the IC model that matches the DMX512 IC used in the lamp.
One-Key Address Setup
Verify all settings are correct.
Click "SET" to finalize and output the programmed configuration.
One-Key Code Writing (Controller)
Insert the SD card into the controller.
Power on the controller.
Press and hold the "MODE" button for 5 seconds.
The controller screen will display "A-A-A", indicating address writing mode.
After address writing completes, the controller automatically enters channel test mode (identical to post-manual-address-writing testing).
Post-testing:
Press the "CHIP" button to exit test mode.
The controller returns to playback mode for normal operation.
Key Improvements
Simplified technical jargon (e.g., "program output" → "programmed configuration").
Added clear subheadings for easy navigation.
Standardized terminology (e.g., "code writing" → "address writing").
Structured steps with bold actions and contextual notes for clarity.
Unified formatting for consistency (e.g., button names in quotes).
Hot Tags: K-1000C LED Controller, China K-1000C LED Controller suppliers, RGB LED Eaves String Light, led controller for pet store lighting, 24V RGB LED Flexible Wall Washer Light, led controller for coffee shop lighting, K 8000c Led Controller, Flexible Neon Linear Light DC12V Red Color
